PalletGel By PMI

**NOW AVAILABLE**

Sheet Size: 15.5"X21"

Durable 1mm thick Gel adhesive on the garment side

• Lasts for several months
• Lint can be cleaned off with water and a scrub pad

PalletGel changes color from green to yellow when your pallets are warmed to 120F
Warm/Preheated Pallets:

• Allow ink to flow through mesh smoothly
• Help prevent ink from sticking to the bottom of your screens
• Ensure consistency so your first print will be like your last
• Speed up flash time

PalletGel is applied directly to the pallets

• No need for paper pallet tape
  

Film release liners on both sides

• Allow for a smooth application

Made in the USA

• Noblesville, Indiana

Patent Pending

Application Instructions:

Step 1: Clean the Pallets
Ensure the pallets are clean and dry for optimal adhesion of PalletGel.

Step 2: Apply PalletGel
Align the back edge of PalletGel with your pallet. While keeping the opposite end lifted, use a squeegee card or another rigid tool to smooth PalletGel onto the pallet. Take your time during this step to avoid air bubbles, as PalletGel is designed to remain on your pallets for an extended period.

Step 3: Tape the Edges (Important)
Remove the top release liner from PalletGel and secure all four edges to the pallet using masking tape. This will help shirts slide on and off easily and prevent PalletGel from lifting over time.

Step 4: Clean as Needed
Remove lint from PalletGel using water and a scrub pad. Once the water evaporates, PalletGel will regain its stickiness. If ink gets on PalletGel, use an on-press cleaner to remove it.